Flame Out Heated Grip Black RH SB075

Get a handle on colder rides with Flame Out Heated Grips. These 12V electric grips fit all models of 7/8" handlebars and heat up quickly to keep your hands toasty in cold temperatures. Unlike traditional heated grips, Flame Out Heated Grip Black is lightweight, reliable and easy to install, so you can hit the road without fear of a chill.

Remove the original handlebar

The inner hole of the left handlebar shall be wetted with soapy water, and the twisting range shall not be too large during installation

When installing the balance iron on the left handlebar, adjust the position of the balance iron to be slightly separated from the handlebar, and do not squeeze the handlebar when tightening the screws

If the middle left handlebar slides on the steel pipe, remove the balance iron and fix it with a few drops of 502 glue from the end of the handlebar

The power line and red line are connected to the positive pole, and the black line is connected to the negative pole. The reverse connection temperature cannot be adjusted

During the installation of the left handlebar, the power cord should be left with enough residual wire for rotation

12V voltage, 22MM handle inner diameter, suitable for most motorcycles

High and low gear switches are set for products, and the handle temperature can be adjusted at will (50 ℃ - 70 ℃ adjustable)

Double throttle line clip, wider installation range

The design of sealing and opening does not affect the installation of handlebar plugs outside the handlebars. The decorative accessories such as handlebars are more beautiful and convenient